2-1/2″ Dr. 60mm Jumbo Impact Socket Cr-Mo

2-1/2″ Dr. 60mm Jumbo Impact Socket Cr-Mo

  • SPECIFICATIONS
  • SAFETY INFORMATION
  • REPLACEMENT PARTS

2-1/2" Dr. 6 pt. Metric Jumbo Impact Sockets Cr-Mo

Item No. A
mm
D1
mm
D2
mm
Length
mm
Weight
G
PCS
G.W.
kgs.
CUFT
Code
@
920460* 60 98 127 125 6700 NA 0.0 NA 093000
920463* 63 102 127 125 6800 NA 0.0 NA 093000
920465* 65 105 127 125 6930 NA 0.0 NA 093000
920470* 70 112 127 125 7150 NA 0.0 NA 093000
920475* 75 118 127 125 7300 NA 0.0 NA 093000
920480* 80 124 127 125 7460 NA 0.0 NA 093000
920485* 85 131 127 132 8270 NA 0.0 NA 094500
920490* 90 137 127 132 8560 NA 0.0 NA 097500
920495* 95 144 127 140 9500 NA 0.0 NA 108000
920500* 100 150 127 142 10000 NA 0.0 NA 111000
920505* 105 156 127 146 10820 NA 0.0 NA 117000
920510* 110 162 127 155 12030 NA 0.0 NA 126000
920515* 115 169 127 158 12900 NA 0.0 NA 132000
920520* 120 175 175 160 19200 NA 0.0 NA 142500
920525* 125 181 175 165 20650 NA 0.0 NA 153000
920530* 130 188 175 169 21660 NA 0.0 NA 165000
920535* 135 194 175 175 22690 NA 0.0 NA 195000
920540* 140 200 175 180 23980 NA 0.0 NA 221400
920545* 145 206 175 183 25060 NA 0.0 NA 235500
920550* 150 212 175 192 27050 NA 0.0 NA 268500
920555* 155 219 175 196 28500 NA 0.0 NA 288000
920560* 160 226 175 200 30100 NA 0.0 NA 309000
920565* 165 232 175 204 31650 NA 0.0 NA 333600
920570* 170 238 175 207 33250 NA 0.0 NA 354000
920575* 175 244 175 211 34950 NA 0.0 NA 375000
920580* 180 251 175 214 36750 NA 0.0 NA 407100
920585* 185 257 175 218 38460 NA 0.0 NA 426000
920590* 190 264 175 220 40500 NA 0.0 NA 457500
920595* 195 270 175 222 42000 NA 0.0 NA 487500
920600* 200 276 175 225 44100 NA 0.0 NA 517500
920605* 205 282 175 230 46200 NA 0.0 NA 544500
920610* 210 288 175 235 48960 NA 0.0 NA 571500
920615* 215 295 175 240 51900 NA 0.0 NA 597600
920620* 220 301 175 245 54350 NA 0.0 NA 616000
920625* 225 308 175 250 57600 NA 0.0 NA 634500
920630* 230 314 175 255 60890 NA 0.0 NA 659000
920635* 235 320 175 260 63270 NA 0.0 NA 684600
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.
  • Rubber Ring and Steel Pin Kits, 09260RP


    Conversion Calculator

    =
    1