1/2" Dr. 27mm Impact Socket

1/2″ Dr. 27mm Impact Socket

Genius Tools SKU:413827

SPECIFICATIONS
SAFETY INFORMATION

1/2" Dr. 6 pt. Metric Impact Sockets Cr-V

Item No.	A mm	D1 mm	D2 mm	Length mm	Weight G	PCS	G.W. kgs.	CUFT	Code @
413808	8	15	24	38	80	200	17.0	0.59	000210
413809	9	16	24	38	80	200	17.0	0.59	000210
413810	10	17	24	38	80	200	17.0	0.59	000210
413811	11	18	24	38	80	200	17.0	0.59	000210
413812	12	20	24	38	80	200	17.0	0.59	000210
413813	13	21	24	38	80	200	17.0	0.59	000210
413814	14	22	24	38	80	200	17.0	0.59	000210
413815	15	24	24	38	80	200	17.0	0.59	000210
413816	16	24	24	38	90	200	19.0	0.59	000210
413817	17	26	26	38	100	200	21.0	0.59	000210
413818	18	27	27	38	110	200	23.0	0.59	000240
413819	19	28	28	40	130	200	27.0	0.59	000240
413820	20	29	29	40	135	150	21.0	0.67	000265
413821	21	30	30	40	140	150	22.0	0.67	000265
413822	22	32	32	42	150	100	24.0	0.67	000300
413823	23	33	33	42	170	100	18.0	0.62	000330
413824	24	34	34	44	180	100	19.0	0.62	000360
413825	25	36	36	44	190	100	20.0	0.62	000400
413826	26	37	37	44	190	100	20.0	0.62	000445
413827	27	38	35	46	200	100	21.0	0.62	000445
413828	28	40	35	46	210	100	22.0	0.62	000565
413829	29	41	35	46	220	100	23.0	0.62	000565
413830	30	42	35	46	240	100	25.0	0.62	000565
413831	31	44	35	46	250	100	26.0	0.62	000620
413832	32	45	35	46	260	100	27.0	0.62	000620

â?¢ Always wear safety goggles and protective equipment while using any impact tool.

â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.

â?¢ Always use retaining ring and pin to hold socket on impact tool.

â?¢ Do not use damaged or worn sockets or accessories.

â?¢ Do not run the impact tool while placing the socket over the nut.

â?¢ Do not hold the socket or accessory while the tool is in operation.

â?¢ Do not continue to drive with an impact socket once the fastener is tight.

â?¢ Do not use hand sockets or accessories on impact tools.