1/2" Dr. 18mm Deep Impact Socket

1/2″ Dr. 18mm Deep Impact Socket

Genius Tools SKU:417818

SPECIFICATIONS
SAFETY INFORMATION

1/2" Dr. 6 pt. Metric Deep Impact Sockets Cr-V

Item No.	A mm	D1 mm	D2 mm	Length mm	Weight G	PCS	G.W. kgs.	CUFT	Code @
417808	8	15	23	78	180	140	26.0	0.44	000335
417809	9	16	23	78	180	140	26.0	0.44	000335
417810	10	17	23	78	180	140	26.0	0.44	000335
417811	11	18	23	78	180	140	26.0	0.44	000335
417812	12	20	23	78	180	140	26.0	0.44	000335
417813	13	21	23	78	180	140	26.0	0.44	000335
417814	14	22	23	78	190	140	27.0	0.44	000335
417815	15	24	24	78	190	140	27.0	0.44	000360
417816	16	24	24	78	190	140	27.0	0.44	000385
417817	17	26	26	78	200	120	28.0	0.52	000405
417818	18	27	27	78	210	120	28.0	0.52	000420
417819	19	28	28	78	250	120	31.0	0.52	000450
417820	20	29	29	78	270	120	33.0	0.52	000495
417821	21	30	30	78	280	60	18.0	0.45	000495
417822	22	32	32	78	290	60	19.0	0.45	000520
417823	23	33	33	78	320	60	22.0	0.45	000545
417824	24	34	34	78	340	60	22.0	0.45	000570
417825	25	36	36	78	340	60	22.0	0.45	000685
417826	26	37	35	78	350	60	22.0	0.45	000765
417827	27	38	35	78	380	60	22.0	0.45	000765
417828	28	40	35	78	390	50	20.0	0.62	000825
417829	29	41	35	78	400	50	21.0	0.62	000825
417830	30	42	35	78	410	50	22.0	0.62	000825
417831	31	44	35	78	450	50	23.0	0.62	000885
417832	32	45	35	78	460	50	24.0	0.62	000885

â?¢ Always wear safety goggles and protective equipment while using any impact tool.

â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.

â?¢ Always use retaining ring and pin to hold socket on impact tool.

â?¢ Do not use damaged or worn sockets or accessories.

â?¢ Do not run the impact tool while placing the socket over the nut.

â?¢ Do not hold the socket or accessory while the tool is in operation.

â?¢ Do not continue to drive with an impact socket once the fastener is tight.

â?¢ Do not use hand sockets or accessories on impact tools.