1. Home
  2. Impact Tools
  3. Impact Sockets (Cr-Mo)
  4. 1/2″ Dr. 34mm Thin Wall Impact Socket Cr-Mo
1/2″ Dr. 34mm Thin Wall Impact Socket Cr-Mo
1/2″ Dr. 34mm Thin Wall Impact Socket Cr-Mo

1/2″ Dr. 34mm Thin Wall Impact Socket Cr-Mo

1/2″ Dr. 34mm Thin Wall Impact Socket Cr-Mo

  • SPECIFICATIONS
  • SAFETY INFORMATION

1/2" Dr. 6 pt. Metric Thin Wall Impact Sockets Cr-Mo

Item No. A
mm		 D1
mm		 D2
mm		 Length
mm		 Weight
G		 PCS
 G.W.
kgs.		 CUFT
 Code
@
443808 8 14 24 38 50 200 11.0 0.59 000360
443809 9 15 24 38 55 200 12.0 0.59 000360
443810 10 16 24 38 55 200 12.0 0.59 000360
443811 11 17 24 38 55 200 12.0 0.59 000360
443812 12 19 24 38 55 200 12.0 0.59 000360
443813 13 20 24 38 60 200 13.0 0.59 000360
443814 14 21 24 38 60 200 13.0 0.59 000360
443815 15 22 24 38 60 200 13.0 0.59 000435
443816 16 23 24 38 65 200 14.0 0.59 000435
443817 17 24 24 38 65 200 14.0 0.59 000435
443818 18 26 26 38 80 200 17.0 0.59 000435
443819 19 27 27 40 85 200 18.0 0.59 000435
443820 20 28 28 40 90 150 15.0 0.52 000460
443821 21 29 29 40 110 150 17.0 0.52 000460
443822 22 31 30 42 120 150 19.0 0.52 000475
443823 23 32 30 42 130 150 21.0 0.52 000500
443824 24 33 30 44 140 150 23.0 0.52 000525
443825 25 34 30 44 180 100 19.0 0.62 000660
443826 26 36 30 44 190 100 20.0 0.62 000660
443827 27 37 30 46 200 100 21.0 0.62 000660
443828 28 38 30 46 210 100 22.0 0.62 000780
443829 29 39 30 46 210 100 22.0 0.62 000780
443830 30 41 30 46 220 100 23.0 0.62 000810
443831 31 42 30 46 240 100 25.0 0.62 000885
443832 32 43 30 46 250 100 26.0 0.62 000885
443833 33 44 35 46 280 100 29.0 0.62 001110
443834 34 46 35 46 300 50 16.0 0.41 001110
443835 35 47 35 48 310 30 10.0 0.34 001110
443836 36 48 35 48 330 30 11.0 0.34 001110
443837 37 49 35 48 340 30 11.0 0.34 001110
443838 38 51 35 48 350 30 11.0 0.34 001110
443839 39 53 35 50 360 30 12.0 0.34 001300
443840 40 54 35 55 410 30 13.0 0.34 001400
443841 41 56 35 55 450 30 14.0 0.34 001500
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.

    • Conversion Calculator

    =
    1