1/2" Dr. 20mm Impact Socket Cr-Mo

1/2″ Dr. 20mm Impact Socket Cr-Mo

Genius Tools SKU:444020

SPECIFICATIONS
SAFETY INFORMATION
REPLACEMENT PARTS

1/2" Dr. 6 pt. Metric Impact Sockets Cr-Mo

Item No.	A mm	D1 mm	D2 mm	Length mm	Weight G	PCS	G.W. kgs.	CUFT	Code @
444008	8	15	24	38	80	200	17.0	0.59	000360
444009	9	16	24	38	80	200	17.0	0.59	000360
444010	10	17	24	38	80	200	17.0	0.59	000360
444011	11	18	24	38	80	200	17.0	0.59	000360
444012	12	20	24	38	80	200	17.0	0.59	000360
444013	13	21	24	38	80	200	17.0	0.59	000360
444014	14	22	24	38	80	200	17.0	0.59	000360
444015	15	24	24	38	80	200	17.0	0.59	000435
444016	16	25	25	38	90	200	19.0	0.59	000435
444017	17	26	26	38	100	200	21.0	0.59	000435
444018	18	27	27	38	110	200	23.0	0.59	000435
444019	19	29	29	40	130	200	27.0	0.59	000435
444020	20	30	30	40	135	150	21.0	0.67	000460
444021	21	30	30	40	140	150	22.0	0.67	000460
444022	22	32	30	42	150	150	24.0	0.67	000475
444023	23	34	30	42	170	150	26.0	0.67	000500
444024	24	35	30	44	180	150	28.0	0.67	000525
444025	25	36	30	44	190	100	20.0	0.62	000660
444026	26	37	30	44	190	100	20.0	0.62	000660
444027	27	39	30	46	200	100	21.0	0.62	000660
444028	28	40	30	46	210	100	22.0	0.62	000780
444029	29	41	30	46	220	100	23.0	0.62	000780
444030	30	42	30	46	240	100	25.0	0.62	000810
444031	31	44	30	46	250	100	26.0	0.62	000885
444032	32	45	30	46	260	100	27.0	0.62	000885
444033	33	46	35	46	310	50	16.0	0.41	001110
444034	34	48	35	46	320	50	17.0	0.41	001110
444035	35	49	35	48	330	30	11.0	0.34	001110
444036	36	50	35	48	330	30	11.0	0.34	001110
444037	37	51	35	48	330	30	11.0	0.34	001110
444038	38	53	35	48	360	30	12.0	0.34	001110
444039	39	55	35	50	480	30	15.0	0.34	001300
444040	40	56	35	55	510	30	16.0	0.34	001400
444041	41	57	35	55	550	30	17.0	0.34	001500

â?¢ Always wear safety goggles and protective equipment while using any impact tool.

â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.

â?¢ Always use retaining ring and pin to hold socket on impact tool.

â?¢ Do not use damaged or worn sockets or accessories.

â?¢ Do not run the impact tool while placing the socket over the nut.

â?¢ Do not hold the socket or accessory while the tool is in operation.

â?¢ Do not continue to drive with an impact socket once the fastener is tight.

â?¢ Do not use hand sockets or accessories on impact tools.

Rubber Ring and Steel Pin Kits, 04417RP|Safety Spring Kits, 04617SP

Conversion Calculator

Millimeter

1Inch