1/2" Dr. 5mm Hex Head Driver 60mmL

1/2″ Dr. 5mm Hex Head Driver 60mmL

Genius Tools SKU:446005

SPECIFICATIONS
SAFETY INFORMATION

1/2" Dr. Metric Hex Head Drivers

Item No.	A mm	D mm	Length mm	Weight G	PCS	G.W. kgs.	CUFT	Code @
446004	4	24	60	70	140	11.0	0.44	000590
446005	5	24	60	70	140	11.0	0.44	000590
446006	6	24	60	70	140	11.0	0.44	000590
446007	7	24	60	75	140	11.0	0.44	000590
446008	8	24	60	75	140	11.0	0.44	000590
446009	9	24	60	80	140	12.0	0.44	000590
446010	10	26	60	100	140	15.0	0.44	000590
446012	12	26	60	110	140	16.0	0.44	000590
446013	13	26	60	120	120	15.0	0.52	000590
446014	14	26	60	130	120	16.0	0.52	000590
446016	16	28	60	150	120	19.0	0.52	000650
446017	17	28	60	160	120	20.0	0.52	000650
446019	19	28	60	170	120	21.0	0.52	000650
446021	21	28	60	190	120	24.0	0.52	000650
447604	4	24	76	75	140	11.0	0.44	000735
447605	5	24	76	75	140	11.0	0.44	000735
447606	6	24	76	80	140	12.0	0.44	000735
447607	7	24	76	85	140	13.0	0.44	000735
447608	8	24	76	85	140	13.0	0.44	000735
447609	9	24	76	90	140	13.0	0.44	000735
447610	10	26	76	110	140	16.0	0.44	000735
447612	12	26	76	130	140	19.0	0.44	000735
447614	14	26	76	150	120	19.0	0.52	000735
447616	16	28	76	200	120	25.0	0.52	000885
447617	17	28	76	210	120	26.0	0.52	000885
447619	19	28	76	230	120	28.0	0.52	000885
447621	21	28	76	260	120	32.0	0.52	000885

â?¢ Always wear safety goggles and protective equipment while using any impact tool.

â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.

â?¢ Always use retaining ring and pin to hold socket on impact tool.

â?¢ Do not use damaged or worn sockets or accessories.

â?¢ Do not run the impact tool while placing the socket over the nut.

â?¢ Do not hold the socket or accessory while the tool is in operation.

â?¢ Do not continue to drive with an impact socket once the fastener is tight.

â?¢ Do not use hand sockets or accessories on impact tools.