1. Home
  2. Impact Tools
  3. Head Drivers
  4. 1/2″ Dr. 2.5 x 14mm Slotted Head Driver 76mmL
1/2″ Dr. 2.5 x 14mm Slotted Head Driver 76mmL
1/2″ Dr. 2.5 x 14mm Slotted Head Driver 76mmL

1/2″ Dr. 2.5 x 14mm Slotted Head Driver 76mmL

1/2″ Dr. 2.5 x 14mm Slotted Head Driver 76mmL

  • SPECIFICATIONS
  • SAFETY INFORMATION

1/2" Dr. Slotted Head Drivers

Item No. TxW
mm		 D
mm		 Length
mm		 Weight
G		 PCS
 G.W.
kgs.		 CUFT
 Code
@
4460P08 1.2 x 8.0 24 60 70 140 11.0 0.44 000590
4460P10 1.6 x 10.0 24 60 80 140 12.0 0.44 000590
4460P12 2.0 x 12.0 24 60 85 140 13.0 0.44 000590
4460P14 2.5 x 14.0 24 60 95 140 14.0 0.44 000590
4460P16 2.5 x 16.0 24 60 100 140 15.0 0.44 000590
4476P08 1.2 x 8.0 24 76 80 140 12.0 0.44 000735
4476P10 1.6 x 10.0 24 76 85 140 13.0 0.44 000735
4476P12 2.0 x 12.0 24 76 100 140 15.0 0.44 000735
4476P14 2.5 x 14.0 24 76 110 140 16.0 0.44 000735
4476P16 2.5 x 16.0 24 76 130 140 19.0 0.44 000735
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.

    • Conversion Calculator

    =
    1