1/2" Dr. 13mm (12 pt.) Thin Wall Impact Socket Cr-Mo

1/2″ Dr. 13mm (12 pt.) Thin Wall Impact Socket Cr-Mo

Genius Tools SKU:453813

SPECIFICATIONS
SAFETY INFORMATION

1/2" Dr. 12 pt. Metric Thin Wall Impact Sockets Cr-Mo

Item No.	A mm	D1 mm	D2 mm	Length mm	Weight G	PCS	G.W. kgs.	CUFT	Code @
453808	8	14	24	38	50	200	13.0	0.59	000360
453809	9	15	24	38	55	200	13.0	0.59	000360
453810	10	16	24	38	55	200	13.0	0.59	000360
453811	11	17	24	38	55	200	13.0	0.59	000360
453812	12	19	24	38	55	200	13.0	0.59	000360
453813	13	20	24	38	60	200	14.0	0.59	000360
453814	14	21	24	38	60	200	14.0	0.59	000360
453815	15	22	24	38	60	200	14.0	0.59	000435
453816	16	23	24	38	65	200	15.0	0.59	000435
453817	17	24	24	38	65	200	15.0	0.59	000435
453818	18	26	26	38	80	200	18.0	0.59	000435
453819	19	27	27	40	85	200	19.0	0.59	000435
453820	20	28	28	40	95	150	16.0	0.52	000460
453821	21	29	29	40	100	150	17.0	0.52	000460
453822	22	31	30	42	120	150	20.0	0.52	000475
453823	23	32	30	42	130	150	20.0	0.52	000500
453824	24	33	30	44	140	150	22.0	0.52	000525
453825	25	34	30	44	140	100	16.0	0.62	000660
453826	26	36	30	44	150	100	16.0	0.62	000660
453827	27	37	30	46	160	100	18.0	0.62	000660
453828	28	38	30	46	160	100	18.0	0.62	000780
453829	29	39	30	46	170	100	18.0	0.62	000780
453830	30	41	30	46	180	100	20.0	0.62	000810
453831	31	42	30	46	180	100	20.0	0.62	000885
453832	32	43	30	46	190	100	21.0	0.62	000885
453833	33	44	35	46	220	100	24.0	0.62	001110
453834	34	46	35	46	250	50	13.0	0.41	001110
453835	35	47	35	48	260	30	9.0	0.34	001110
453836	36	48	35	48	270	30	9.0	0.34	001110
453837	37	49	35	48	290	30	10.0	0.34	001110
453838	38	51	35	48	300	30	10.0	0.34	001110
453839	39	53	35	48	320	30	11.0	0.34	001300
453840	40	54	35	55	380	30	12.0	0.34	001400
453841	41	56	35	55	380	30	13.0	0.34	001500

â?¢ Always wear safety goggles and protective equipment while using any impact tool.

â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.

â?¢ Always use retaining ring and pin to hold socket on impact tool.

â?¢ Do not use damaged or worn sockets or accessories.

â?¢ Do not run the impact tool while placing the socket over the nut.

â?¢ Do not hold the socket or accessory while the tool is in operation.

â?¢ Do not continue to drive with an impact socket once the fastener is tight.

â?¢ Do not use hand sockets or accessories on impact tools.

Conversion Calculator

Millimeter

1Inch