1. Home
  2. Impact Tools
  3. Impact Sockets (Cr-Mo)
  4. 1/2″ Dr. 36mm (12 pt.) Thin Wall Impact Socket Cr-Mo
1/2″ Dr. 36mm (12 pt.) Thin Wall Impact Socket Cr-Mo
1/2″ Dr. 36mm (12 pt.) Thin Wall Impact Socket Cr-Mo

1/2″ Dr. 36mm (12 pt.) Thin Wall Impact Socket Cr-Mo

1/2″ Dr. 36mm (12 pt.) Thin Wall Impact Socket Cr-Mo

  • SPECIFICATIONS
  • SAFETY INFORMATION

1/2" Dr. 12 pt. Metric Thin Wall Impact Sockets Cr-Mo

Item No. A
mm		 D1
mm		 D2
mm		 Length
mm		 Weight
G		 PCS
 G.W.
kgs.		 CUFT
 Code
@
453808 8 14 24 38 50 200 13.0 0.59 000360
453809 9 15 24 38 55 200 13.0 0.59 000360
453810 10 16 24 38 55 200 13.0 0.59 000360
453811 11 17 24 38 55 200 13.0 0.59 000360
453812 12 19 24 38 55 200 13.0 0.59 000360
453813 13 20 24 38 60 200 14.0 0.59 000360
453814 14 21 24 38 60 200 14.0 0.59 000360
453815 15 22 24 38 60 200 14.0 0.59 000435
453816 16 23 24 38 65 200 15.0 0.59 000435
453817 17 24 24 38 65 200 15.0 0.59 000435
453818 18 26 26 38 80 200 18.0 0.59 000435
453819 19 27 27 40 85 200 19.0 0.59 000435
453820 20 28 28 40 95 150 16.0 0.52 000460
453821 21 29 29 40 100 150 17.0 0.52 000460
453822 22 31 30 42 120 150 20.0 0.52 000475
453823 23 32 30 42 130 150 20.0 0.52 000500
453824 24 33 30 44 140 150 22.0 0.52 000525
453825 25 34 30 44 140 100 16.0 0.62 000660
453826 26 36 30 44 150 100 16.0 0.62 000660
453827 27 37 30 46 160 100 18.0 0.62 000660
453828 28 38 30 46 160 100 18.0 0.62 000780
453829 29 39 30 46 170 100 18.0 0.62 000780
453830 30 41 30 46 180 100 20.0 0.62 000810
453831 31 42 30 46 180 100 20.0 0.62 000885
453832 32 43 30 46 190 100 21.0 0.62 000885
453833 33 44 35 46 220 100 24.0 0.62 001110
453834 34 46 35 46 250 50 13.0 0.41 001110
453835 35 47 35 48 260 30 9.0 0.34 001110
453836 36 48 35 48 270 30 9.0 0.34 001110
453837 37 49 35 48 290 30 10.0 0.34 001110
453838 38 51 35 48 300 30 10.0 0.34 001110
453839 39 53 35 48 320 30 11.0 0.34 001300
453840 40 54 35 55 380 30 12.0 0.34 001400
453841 41 56 35 55 380 30 13.0 0.34 001500
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.

    • Conversion Calculator

    =
    1