1. Home
  2. Impact Tools
  3. Head Drivers
  4. 1″ Dr. 13/16″ Hex Bit Socket 90mmL
1″ Dr. 13/16″ Hex Bit Socket 90mmL
1″ Dr. 13/16″ Hex Bit Socket 90mmL

1″ Dr. 13/16″ Hex Bit Socket 90mmL

1″ Dr. 13/16″ Hex Bit Socket 90mmL

  • SPECIFICATIONS
  • SAFETY INFORMATION

1" Dr. SAE Hex Bit Sockets

Item No. A
inch		 D
mm		 Length
mm		 Weight
G		 PCS
 G.W.
kgs.		 CUFT
 Code
@
819+3940 5/8 50 85 610 20 13.0 0.34 002700
819+3948 3/4 50 85 630 20 13.0 0.34 002700
822+3952 13/16 50 90 670 20 14.0 0.34 002800
822+3956 7/8 50 90 690 20 14.0 0.34 002800
822+3960 15/16 50 90 700 20 15.0 0.34 002950
822+3964 1 50 90 720 20 15.0 0.34 002950
827+3968 1-1/16 52 95 900 20 19.0 0.34 003100
827+3972 1-1/8 52 95 920 20 19.0 0.34 003300
827+3976 1-3/16 52 95 940 20 19.0 0.34 003400
827+3980 1-1/4 52 95 960 20 20.0 0.34 003500
832+3984 1-5/16 52 100 1120 20 23.0 0.34 003650
832+3988 1-3/8 52 100 1150 20 24.0 0.34 003800
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.

    • Conversion Calculator

    =
    1