1. Home
  2. Impact Tools
  3. Impact Sockets (Cr-Mo)
  4. 1″ Dr. 38mm Thin Wall Impact Socket Cr-Mo
1″ Dr. 38mm Thin Wall Impact Socket Cr-Mo
1″ Dr. 38mm Thin Wall Impact Socket Cr-Mo

1″ Dr. 38mm Thin Wall Impact Socket Cr-Mo

1″ Dr. 38mm Thin Wall Impact Socket Cr-Mo

  • SPECIFICATIONS
  • SAFETY INFORMATION

1" Dr. 6 pt. Metric Thin Wall Impact Sockets Cr-Mo

Item No. A
mm		 D1
mm		 D2
mm		 Length
mm		 Weight
G		 PCS
 G.W.
kgs.		 CUFT
 Code
@
848022 22 35 52 68 550 30 18.0 0.52 001995
848023 23 37 52 68 560 30 18.0 0.52 001995
848024 24 38 52 68 570 30 18.0 0.52 001995
848025 25 39 52 68 570 30 18.0 0.52 001995
848026 26 40 52 68 580 30 19.0 0.52 001995
848027 27 42 52 68 580 30 19.0 0.52 001995
848028 28 43 52 73 620 30 20.0 0.52 002050
848029 29 44 52 73 630 30 20.0 0.52 002050
848030 30 45 52 73 650 30 20.0 0.52 002050
848032 32 48 52 73 660 30 21.0 0.52 002050
848033 33 49 52 73 670 30 21.0 0.52 002260
848034 34 50 52 76 690 30 22.0 0.52 002260
848035 35 52 52 76 700 30 22.0 0.52 002310
848036 36 53 52 76 710 30 22.0 0.52 002310
848038 38 55 52 80 730 30 23.0 0.52 002365
848041 41 59 52 80 770 30 24.0 0.52 002625
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.

    • Conversion Calculator

    =
    1