1. Home
  2. Impact Tools
  3. Impact Sockets (Cr-Mo)
  4. 1-1/2″ Dr. 44mm Deep Jumbo Impact Socket Cr-Mo
1-1/2″ Dr. 44mm Deep Jumbo Impact Socket Cr-Mo
1-1/2″ Dr. 44mm Deep Jumbo Impact Socket Cr-Mo

1-1/2″ Dr. 44mm Deep Jumbo Impact Socket Cr-Mo

1-1/2″ Dr. 44mm Deep Jumbo Impact Socket Cr-Mo

  • SPECIFICATIONS
  • SAFETY INFORMATION
  • REPLACEMENT PARTS

1-1/2" Dr. 6 pt. Metric Deep Jumbo Impact Socket Cr-Mo

Item No. A
mm		 D1
mm		 D2
mm		 Length
mm		 Weight
G		 PCS
 G.W.
kgs.		 CUFT
 Code
@
939441* 41 68 86 120 2850 NA 0.0 NA 028170
939442* 42 69 86 120 2900 NA 0.0 NA 028170
939443* 43 70 86 120 2900 NA 0.0 NA 028170
939444* 44 71 86 120 3000 NA 0.0 NA 028170
939445* 45 73 86 120 3100 NA 0.0 NA 029060
939446* 46 74 86 130 3200 NA 0.0 NA 029060
939447* 47 75 86 130 3200 NA 0.0 NA 029060
939448* 48 76 86 130 3300 NA 0.0 NA 029060
939449* 49 78 86 130 3400 NA 0.0 NA 029060
939450* 50 79 86 140 3600 NA 0.0 NA 031300
939451* 51 81 86 140 3650 NA 0.0 NA 031300
939452* 52 82 86 140 3750 NA 0.0 NA 031300
939453* 53 83 86 140 3750 NA 0.0 NA 031300
939454* 54 84 86 140 3800 NA 0.0 NA 033700
939455* 55 86 86 150 4200 NA 0.0 NA 035730
939456* 56 87 86 150 4250 NA 0.0 NA 037330
939457* 57 88 86 150 4350 NA 0.0 NA 039000
939458* 58 89 86 150 4350 NA 0.0 NA 040730
939459* 59 91 86 150 4500 NA 0.0 NA 042000
939460* 60 92 86 150 4600 NA 0.0 NA 043330
939461* 61 93 86 150 4700 NA 0.0 NA 043330
939462* 62 95 86 150 4750 NA 0.0 NA 043330
939463* 63 96 86 150 4850 NA 0.0 NA 043330
939464* 64 97 86 150 4950 NA 0.0 NA 043330
939465* 65 98 86 150 4950 NA 0.0 NA 043330
939466* 66 99 86 150 5000 NA 0.0 NA 044210
939467* 67 100 86 150 5000 NA 0.0 NA 044210
939468* 68 102 86 150 5100 NA 0.0 NA 044210
939469* 69 103 86 150 5200 NA 0.0 NA 045000
939470* 70 104 86 150 5350 NA 0.0 NA 047250
939471* 71 105 86 150 5600 NA 0.0 NA 050400
939472* 72 107 86 150 5700 NA 0.0 NA 050400
939473* 73 108 86 150 5900 NA 0.0 NA 050400
939474* 74 109 86 150 6000 NA 0.0 NA 050400
939475* 75 110 86 160 6200 NA 0.0 NA 050400
939476* 76 111 86 160 6400 NA 0.0 NA 054240
939477* 77 112 86 160 6600 NA 0.0 NA 056670
939478* 78 114 86 160 6800 NA 0.0 NA 059100
939479* 79 115 86 160 6900 NA 0.0 NA 059100
939480* 80 116 86 170 7050 NA 0.0 NA 060270
939482* 82 118 86 170 7350 NA 0.0 NA 061820
939483* 83 120 86 170 7500 NA 0.0 NA 061820
939485* 85 123 86 170 7700 NA 0.0 NA 064140
939490* 90 129 86 180 8750 NA 0.0 NA 073130
939495* 95 136 127 180 11550 NA 0.0 NA 081960
939500* 100 142 127 190 12800 NA 0.0 NA 099130
939505* 105 148 127 190 13700 NA 0.0 NA 104500
939510* 110 154 127 200 14900 NA 0.0 NA 110480
939515* 115 160 127 200 15800 NA 0.0 NA 123440
939520* 120 167 127 210 17900 NA 0.0 NA 136820
939525* 125 174 127 210 19000 NA 0.0 NA 138970
939530* 130 180 127 210 19950 NA 0.0 NA 238500
939535* 135 186 127 220 22100 NA 0.0 NA 273100
939540* 140 192 127 220 23150 NA 0.0 NA 352000
939545* 145 198 127 220 24200 NA 0.0 NA 404520
939550* 150 204 127 230 26600 NA 0.0 NA 421190
939555* 155 210 127 230 28000 NA 0.0 NA 421190
939560* 160 218 127 230 29800 NA 0.0 NA 432940
939565* 165 224 127 230 31000 NA 0.0 NA 473140
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.

    • Rubber Ring and Steel Pin Kits, 09341RP


    Conversion Calculator

    =
    1