1/2" Dr. 10mm (12 pt.) Deep Thin Wall Impact Socket Cr-Mo

1/2″ Dr. 10mm (12 pt.) Deep Thin Wall Impact Socket Cr-Mo

Genius Tools SKU:448510

SPECIFICATIONS
SAFETY INFORMATION

1/2" Dr. 12 pt. Metric Deep Thin Wall Impact Sockets Cr-Mo

Item No.	A mm	D1 mm	D2 mm	Length mm	Weight G	PCS	G.W. kgs.	CUFT	Code @
448508	8	13	24	85	100	140	15.0	0.44	000750
448509	9	14	24	85	100	140	15.0	0.44	000750
448510	10	16	24	85	120	140	18.0	0.44	000750
448511	11	17	24	85	120	140	18.0	0.44	000750
448512	12	18.0	24	85	130	140	19.0	0.44	000750
448513	13	19	24	85	130	140	19.0	0.44	000750
448514	14	21	24	85	140	140	20.0	0.44	000750
448515	15	22	24	85	150	140	22.0	0.44	000750
448516	16	24	24	85	160	140	23.0	0.44	000750
448517	17	24	24	85	180	120	22.0	0.52	000780
448518	18	26	26	85	190	120	24.0	0.52	000850
448519	19	27	27	85	200	120	25.0	0.52	000850
448520	20	28	28	85	230	120	28.0	0.52	000900
448521	21	29	29	85	240	60	15.0	0.45	000900
448522	22	31	31	85	260	60	16.0	0.45	001000
448523	23	32	30	85	280	60	18.0	0.45	001100
448524	24	33	30	85	300	60	19.0	0.45	001100
448525	25	34	30	85	290	60	18.0	0.45	001200
448526	26	36	30	85	310	60	19.0	0.45	001300
448527	27	38	30	85	340	60	21.0	0.45	001450
448528	28	39	30	85	360	60	22.0	0.62	001600
448529	29	40	30	85	370	60	23.0	0.62	001700
448530	30	42	30	85	390	50	21.0	0.62	001800
448531	31	43	30	85	410	50	21.0	0.62	001800
448532	32	44	30	85	420	50	22.0	0.62	001850
448533	33	45	35	85	450	50	23.0	0.62	001950
448534	34	47	35	85	490	50	24.0	0.62	001950
448535	35	48	35	85	500	50	25.0	0.62	001950
448536	36	50	35	85	550	30	17.0	0.52	002050
448537	37	51	35	85	560	30	18.0	0.52	002050
448538	38	52	35	85	570	30	18.0	0.52	002150
448539	39	53	35	85	580	30	19.0	0.52	002150
448540	40	54	35	85	620	30	19.0	0.52	002250
448541	41	56	35	85	630	30	20.0	0.52	002250

â?¢ Always wear safety goggles and protective equipment while using any impact tool.

â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.

â?¢ Always use retaining ring and pin to hold socket on impact tool.

â?¢ Do not use damaged or worn sockets or accessories.

â?¢ Do not run the impact tool while placing the socket over the nut.

â?¢ Do not hold the socket or accessory while the tool is in operation.

â?¢ Do not continue to drive with an impact socket once the fastener is tight.

â?¢ Do not use hand sockets or accessories on impact tools.

Conversion Calculator

Millimeter

1Inch