1/2" Dr. 19mm Semi-Deep Thin Wall Impact Socket Cr-Mo

1/2″ Dr. 19mm Semi-Deep Thin Wall Impact Socket Cr-Mo

Genius Tools SKU:445219

[Social9_Share]

SPECIFICATIONS
SAFETY INFORMATION

1/2" Dr. 6 pt. Metric Semi-Deep Thin Wall Impact Sockets Cr-Mo

Item No.	A mm	D1 mm	D2 mm	Length mm	Weight G	PCS	G.W. kgs.	CUFT	Code @
445210	10	16	24	52	80	140	12.0	0.44	000500
445211	11	17	24	52	80	140	12.0	0.44	000500
445212	12	18	24	52	80	140	12.0	0.44	000500
445213	13	19	24	52	90	140	13.5	0.44	000500
445214	14	21	24	52	90	140	13.5	0.44	000520
445215	15	22	24	52	100	140	15.5	0.44	000520
445216	16	23	24	52	100	140	15.5	0.44	000520
445217	17	24	24	52	100	140	15.5	0.44	000520
445218	18	26	26	52	110	150	18.0	0.69	000550
445219	19	27	27	52	120	150	19.5	0.69	000570
445220	20	28	28	52	140	120	18.5	0.52	000600
445221	21	29	29	52	150	120	19.5	0.52	000600
445222	22	31	31	52	170	120	22.5	0.52	000670
445223	23	32	32	52	190	120	24.0	0.52	000720
445224	24	33	33	52	200	120	25.0	0.52	000720

â?¢ Always wear safety goggles and protective equipment while using any impact tool.

â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.

â?¢ Always use retaining ring and pin to hold socket on impact tool.

â?¢ Do not use damaged or worn sockets or accessories.

â?¢ Do not run the impact tool while placing the socket over the nut.

â?¢ Do not hold the socket or accessory while the tool is in operation.

â?¢ Do not continue to drive with an impact socket once the fastener is tight.

â?¢ Do not use hand sockets or accessories on impact tools.

Conversion Calculator

Millimeter

1Inch