1. Home
  2. Impact Tools
  3. Impact Sockets (Cr-Mo)
  4. 1/2″ Dr. 38mm Impact Socket Cr-Mo
1/2″ Dr. 38mm Impact Socket Cr-Mo
1/2″ Dr. 38mm Impact Socket Cr-Mo

1/2″ Dr. 38mm Impact Socket Cr-Mo

1/2″ Dr. 38mm Impact Socket Cr-Mo

  • SPECIFICATIONS
  • SAFETY INFORMATION
  • REPLACEMENT PARTS

1/2" Dr. 6 pt. Metric Impact Sockets Cr-Mo

Item No. A
mm		 D1
mm		 D2
mm		 Length
mm		 Weight
G		 PCS
 G.W.
kgs.		 CUFT
 Code
@
444008 8 15 24 38 80 200 17.0 0.59 000360
444009 9 16 24 38 80 200 17.0 0.59 000360
444010 10 17 24 38 80 200 17.0 0.59 000360
444011 11 18 24 38 80 200 17.0 0.59 000360
444012 12 20 24 38 80 200 17.0 0.59 000360
444013 13 21 24 38 80 200 17.0 0.59 000360
444014 14 22 24 38 80 200 17.0 0.59 000360
444015 15 24 24 38 80 200 17.0 0.59 000435
444016 16 25 25 38 90 200 19.0 0.59 000435
444017 17 26 26 38 100 200 21.0 0.59 000435
444018 18 27 27 38 110 200 23.0 0.59 000435
444019 19 29 29 40 130 200 27.0 0.59 000435
444020 20 30 30 40 135 150 21.0 0.67 000460
444021 21 30 30 40 140 150 22.0 0.67 000460
444022 22 32 30 42 150 150 24.0 0.67 000475
444023 23 34 30 42 170 150 26.0 0.67 000500
444024 24 35 30 44 180 150 28.0 0.67 000525
444025 25 36 30 44 190 100 20.0 0.62 000660
444026 26 37 30 44 190 100 20.0 0.62 000660
444027 27 39 30 46 200 100 21.0 0.62 000660
444028 28 40 30 46 210 100 22.0 0.62 000780
444029 29 41 30 46 220 100 23.0 0.62 000780
444030 30 42 30 46 240 100 25.0 0.62 000810
444031 31 44 30 46 250 100 26.0 0.62 000885
444032 32 45 30 46 260 100 27.0 0.62 000885
444033 33 46 35 46 310 50 16.0 0.41 001110
444034 34 48 35 46 320 50 17.0 0.41 001110
444035 35 49 35 48 330 30 11.0 0.34 001110
444036 36 50 35 48 330 30 11.0 0.34 001110
444037 37 51 35 48 330 30 11.0 0.34 001110
444038 38 53 35 48 360 30 12.0 0.34 001110
444039 39 55 35 50 480 30 15.0 0.34 001300
444040 40 56 35 55 510 30 16.0 0.34 001400
444041 41 57 35 55 550 30 17.0 0.34 001500
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.

    • Rubber Ring and Steel Pin Kits, 04433RP|Safety Spring Kits, 04633SP


    Conversion Calculator

    =
    1