1/2" Dr. T-20 Star Head Driver 76mmL

1/2″ Dr. T-20 Star Head Driver 76mmL

Genius Tools SKU:4476S20

SPECIFICATIONS
SAFETY INFORMATION

1/2" Dr. Star Head Drivers

Item No.	A Size	D mm	Length mm	Weight G	PCS	G.W. kgs.	CUFT	Code @
4460S10	T-10	24	60	70	140	11.0	0.44	000590
4460S15	T-15	24	60	70	140	11.0	0.44	000590
4460S20	T-20	24	60	70	140	11.0	0.44	000590
4460S25	T-25	24	60	70	140	11.0	0.44	000590
4460S27	T-27	24	60	70	140	11.0	0.44	000590
4460S30	T-30	24	60	75	140	11.0	0.44	000590
4460S40	T-40	24	60	75	140	11.0	0.44	000590
4460S45	T-45	24	60	75	140	11.0	0.44	000590
4460S50	T-50	26	60	80	140	12.0	0.44	000590
4460S55	T-55	26	60	100	140	15.0	0.44	000590
4460S60	T-60	26	60	110	140	16.0	0.44	000590
4460S70	T-70	26	60	120	140	18.0	0.44	000590
4476S10	T-10	24	76	75	140	11.0	0.44	000735
4476S15	T-15	24	76	75	140	11.0	0.44	000735
4476S20	T-20	24	76	75	140	11.0	0.44	000735
4476S25	T-25	24	76	75	140	11.0	0.44	000735
4476S27	T-27	24	76	75	140	11.0	0.44	000735
4476S30	T-30	24	76	80	140	12.0	0.44	000735
4476S40	T-40	24	76	80	140	12.0	0.44	000735
4476S45	T-45	24	76	80	140	12.0	0.44	000735
4476S50	T-50	26	76	95	140	14.0	0.44	000735
4476S55	T-55	26	76	110	140	16.0	0.44	000735
4476S60	T-60	26	76	120	140	18.0	0.44	000735
4476S70	T-70	26	76	140	140	20.0	0.44	000735

â?¢ Always wear safety goggles and protective equipment while using any impact tool.

â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.

â?¢ Always use retaining ring and pin to hold socket on impact tool.

â?¢ Do not use damaged or worn sockets or accessories.

â?¢ Do not run the impact tool while placing the socket over the nut.

â?¢ Do not hold the socket or accessory while the tool is in operation.

â?¢ Do not continue to drive with an impact socket once the fastener is tight.

â?¢ Do not use hand sockets or accessories on impact tools.

Conversion Calculator

Millimeter

1Inch