1. Home
  2. Impact Tools
  3. Impact Sockets (Cr-Mo)
  4. 3/4″ Dr. 18mm Deep Impact Socket Cr-Mo
3/4″ Dr. 18mm Deep Impact Socket Cr-Mo
3/4″ Dr. 18mm Deep Impact Socket Cr-Mo

3/4″ Dr. 18mm Deep Impact Socket Cr-Mo

3/4″ Dr. 18mm Deep Impact Socket Cr-Mo

  • SPECIFICATIONS
  • SAFETY INFORMATION
  • REPLACEMENT PARTS

3/4" Dr. 6 pt. Metric Deep Impact Sockets Cr-Mo

Item No. A
mm		 D1
mm		 D2
mm		 Length
mm		 Weight
G		 PCS
 G.W.
kgs.		 CUFT
 Code
@
649517 17 29 38 90 390 30 13.0 0.52 001640
649518 18 31 38 90 400 30 13.0 0.52 001640
649519 19 32 38 90 420 30 14.0 0.52 001640
649520 20 33 38 90 430 30 14.0 0.52 001640
649521 21 35 38 90 450 30 14.0 0.52 001640
649522 22 36 40 90 490 30 16.0 0.52 001640
649523 23 38 40 90 520 30 16.0 0.52 001640
649524 24 39 40 90 530 30 17.0 0.52 001640
649525 25 40 40 90 540 30 17.0 0.52 001640
649526 26 41 41 90 560 30 18.0 0.52 001640
649527 27 42 42 90 580 30 18.0 0.52 001640
649528 28 44 44 90 630 30 20.0 0.52 001760
649529 29 45 44 90 630 30 20.0 0.52 001760
649530 30 46 44 90 680 30 21.0 0.52 001875
649531 31 48 44 90 680 30 21.0 0.52 001935
649532 32 49 44 90 740 30 23.0 0.52 001935
649533 33 50 44 90 760 30 24.0 0.52 001995
649534 34 51 44 90 790 30 25.0 0.52 002075
649535 35 53 44 90 800 30 25.0 0.52 002155
649536 36 54 44 90 840 30 26.0 0.52 002260
649537 37 55 44 90 840 30 26.0 0.52 002400
649538 38 56 44 90 880 30 28.0 0.52 002400
649539 39 57 44 90 880 10 10.0 0.31 002890
649540 40 59 44 90 940 10 10.0 0.31 002890
649541 41 60 44 90 970 10 11.0 0.31 003415
649542 42 61 44 90 990 10 11.0 0.31 003675
649543 43 63 44 90 1100 10 11.0 0.31 003675
649544 44 64 44 90 1170 10 13.0 0.31 003940
649545 45 65 44 95 1180 10 13.0 0.31 003940
649546 46 66 44 95 1180 10 13.0 0.31 004465
649547 47 67 44 95 1190 10 13.0 0.31 004935
649548 48 69 44 100 1250 10 13.0 0.31 004935
649549 49 70 44 100 1350 10 14.0 0.31 004935
649550 50 71 44 100 1400 10 15.0 0.31 004935
649551 51 72 44 100 1400 10 15.0 0.31 005100
649552 52 74 54 100 1580 6 10.0 0.41 005100
649553 53 75 54 100 1600 6 10.0 0.41 005400
649554 54 76 54 100 1660 6 11.0 0.41 005400
649555 55 78 54 100 1720 6 11.0 0.41 005650
649556 56 79 54 100 1720 6 11.0 0.41 005950
649557 57 80 54 100 1730 6 11.0 0.41 005950
649558 58 81 54 100 1740 6 11.0 0.41 006200
649559 59 83 60 100 1750 6 11.0 0.41 006600
649560 60 84 60 105 2070 6 13.0 0.41 007160
649561 61 85 60 105 2070 6 13.0 0.41 007850
649562 62 86 60 105 2070 6 13.0 0.41 007850
649563 63 88 60 105 2150 6 14.0 0.41 007850
649564 64 89 60 105 2200 6 14.0 0.41 008960
649565 65 90 60 105 2240 6 14.0 0.41 008960
649566 66 91 60 105 2240 6 14.0 0.41 011300
649567 67 92 60 105 2350 6 15.0 0.41 011300
649568 68 94 60 105 2380 6 15.0 0.41 011850
649569 69 95 60 105 2380 6 15.0 0.41 011850
649570 70 96 60 110 2400 6 15.0 0.41 011850
649571 71 98 60 110 2500 3 9.0 0.31 013950
649572 72 99 60 110 2550 3 9.0 0.31 013950
649573 73 100 60 110 2600 3 9.0 0.31 013950
649574 74 101 60 110 2650 3 9.0 0.31 013950
649575 75 102 60 110 2700 3 9.0 0.31 013950
649576 76 104 60 110 2890 3 10.0 0.31 016000
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.

    • Rubber Ring and Steel Pin Kits, 06417RP


    Conversion Calculator

    =
    1