3/4″ Dr. 2-1/16″ (12 pt.) Thin Wall Impact Socket Cr-Mo

3/4″ Dr. 2-1/16″ (12 pt.) Thin Wall Impact Socket Cr-Mo

  • SPECIFICATIONS
  • SAFETY INFORMATION

3/4" Dr. 12 pt. SAE Thin Wall Impact Sockets Cr-Mo

Item No. A
inch
D1
mm
D2
mm
Length
mm
Weight
G
PCS
G.W.
kgs.
CUFT
Code
@
695222 11/16 28 38 51 210 50 11.0 0.34 000855
695224 3/4 30 38 51 220 50 12.0 0.34 000855
695225 25/32 31 38 51 230 50 12.0 0.34 000855
695226 13/16 32 38 51 230 50 12.0 0.34 000855
695228 7/8 33 40 51 260 50 14.0 0.34 000855
695230 15/16 36 40 51 270 50 14.0 0.34 000855
695232 1" 38 40 54 300 50 16.0 0.34 000855
695234 1-1/16 40 42 54 310 50 16.0 0.41 000855
695236 1-1/8 41 41 54 310 50 16.0 0.41 000910
695238 1-3/16 43 43 54 330 50 17.0 0.41 000970
695240 1-1/4 46 44 57 380 30 12.0 0.34 001025
695242 1-5/16 47 44 57 380 30 12.0 0.34 001115
695244 1-3/8 50 44 57 410 30 13.0 0.34 001175
695246 1-7/16 51 44 57 440 30 14.0 0.34 001260
695248 1-1/2 53 44 57 450 30 14.0 0.34 001315
695250 1-9/16 56 44 58 500 20 11.0 0.39 001645
695252 1-5/8 57 44 58 510 20 11.0 0.39 001645
695254 1-11/16 60 44 60 560 20 12.0 0.39 001910
695256 1-3/4 62 44 63 600 20 13.0 0.39 002100
695258 1-13/16 63 44 63 640 20 14.0 0.39 002300
695260 1-7/8 66 44 65 680 20 14.0 0.39 002435
695262 1-15/16 67 44 65 690 20 14.0 0.39 003150
695264 2" 69 44 68 770 20 16.0 0.39 003150
695266 2-1/16 71 54 70 930 10 19.0 0.43 003940
695268 2-1/8 73 54 73 1040 10 11.0 0.43 003940
695270 2-3/16 75 54 73 1050 10 11.0 0.43 003940
695272 2-1/4 77 54 73 1100 10 12.0 0.43 004620
695274 2-5/16 80 60 73 1240 10 13.0 0.43 005670
695276 2-3/8 81 60 80 1350 10 14.0 0.43 006195
695280 2-1/2 85 60 80 1430 10 15.0 0.43 006825
695284 2-5/8 89 60 85 1500 6 10.0 0.41 007350
695288 2-3/4 93 60 90 1790 6 12.0 0.41 007875
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.

  • Conversion Calculator

    =
    1