3/4″ Dr. 2-1/2″ Deep Impact Socket Cr-Mo

3/4″ Dr. 2-1/2″ Deep Impact Socket Cr-Mo

  • SPECIFICATIONS
  • SAFETY INFORMATION
  • REPLACEMENT PARTS

3/4" Dr. 6 pt. SAE Deep Impact Sockets Cr-Mo

Item No. A
inch
D1
mm
D2
mm
Length
mm
Weight
G
PCS
G.W.
kgs.
CUFT
Code
@
669522 11/16 30 38 90 400 30 13.0 0.52 001640
669524 3/4 32 38 90 420 30 14.0 0.52 001640
669525 25/32 33 38 90 430 30 14.0 0.52 001640
669526 13/16 35 38 90 450 30 14.0 0.52 001640
669528 7/8 36 40 90 490 30 16.0 0.52 001640
669530 15/16 39 40 90 530 30 17.0 0.52 001640
669532 1" 40 40 90 550 30 17.0 0.52 001640
669534 1-1/16 42 42 90 580 30 18.0 0.52 001640
669536 1-1/8 45 44 90 630 30 20.0 0.52 001760
669538 1-3/16 46 44 90 680 30 21.0 0.52 001875
669540 1-1/4 49 44 90 740 30 23.0 0.52 001935
669542 1-5/16 50 44 90 760 30 24.0 0.52 002075
669544 1-3/8 53 44 90 800 30 25.0 0.52 002155
669546 1-7/16 54 44 90 840 30 26.0 0.52 002260
669548 1-1/2 56 44 90 880 10 10.0 0.31 002890
669550 1-9/16 59 44 90 940 10 10.0 0.31 002890
669552 1-5/8 60 44 90 970 10 11.0 0.31 003415
669554 1-11/16 63 44 90 1000 10 11.0 0.31 003675
669556 1-3/4 65 44 95 1180 10 13.0 0.31 003940
669558 1-13/16 66 44 95 1180 10 13.0 0.31 004465
669560 1-7/8 69 44 100 1250 10 13.0 0.31 004935
669562 1-15/16 70 44 100 1350 10 14.0 0.31 004935
669564 2" 72 44 100 1400 10 15.0 0.31 005250
669566 2-1/16 74 54 100 1580 6 10.0 0.41 005500
669568 2-1/8 76 54 100 1660 6 11.0 0.41 005700
669570 2-3/16 78 54 100 1720 6 11.0 0.41 006000
669572 2-1/4 80 54 100 1730 6 11.0 0.41 006300
669574 2-5/16 83 60 100 1750 6 11.0 0.41 006800
669576 2-3/8 84 60 105 2070 6 13.0 0.41 007300
669578 2-7/16 86 60 105 2070 6 13.0 0.41 008100
669580 2-1/2 88 60 105 2150 6 14.0 0.41 008100
669582 2-9/16 90 60 105 2240 6 14.0 0.41 009000
669584 2-5/8 92 60 105 2350 6 15.0 0.41 011700
669586 2-11/16 94 60 105 2380 6 15.0 0.41 011700
669588 2-3/4 96 60 110 2400 6 15.0 0.41 011700
669590 2-13/16 98 60 110 2500 3 9.0 0.31 015600
669592 2-7/8 100 60 110 2600 3 9.0 0.31 016400
669594 2-15/16 102 60 110 2700 3 9.0 0.31 016400
669596 3" 104 60 110 2890 3 10.0 0.31 017200
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.
  • Rubber Ring and Steel Pin Kits, 06452RP


    Conversion Calculator

    =
    1