1. Home
  2. Impact Tools
  3. Impact Sockets (Cr-Mo)
  4. #5 Spline Dr. 1-1/4″ Deep Impact Socket Cr-Mo
#5 Spline Dr. 1-1/4″ Deep Impact Socket Cr-Mo
#5 Spline Dr. 1-1/4″ Deep Impact Socket Cr-Mo

#5 Spline Dr. 1-1/4″ Deep Impact Socket Cr-Mo

#5 Spline Dr. 1-1/4″ Deep Impact Socket Cr-Mo

  • SPECIFICATIONS
  • SAFETY INFORMATION

#5 Spline Dr. 6 pt. SAE Deep Spline Impact Sockets Cr-Mo

Item No. A
inch		 D1
mm		 D2
mm		 Length
mm		 Weight
G		 PCS
 G.W.
kgs.		 CUFT
 Code
@
569528 7/8 38 60 100 820 20 17.0 0.34 007760
569530 15/16 40 60 100 850 20 18.0 0.34 007760
569532 1 42 60 100 890 20 19.0 0.34 007760
569534 1-1/16 44 60 100 920 20 19.0 0.34 007760
569536 1-1/8 46 60 100 960 20 20.0 0.34 007760
569538 1-3/16 48 60 100 990 20 21.0 0.34 007760
569540 1-1/4 50 60 100 1030 20 21.0 0.34 007760
569542 1-5/16 52 60 100 1060 10 11.0 0.31 007760
569544 1-3/8 54 60 100 1100 10 12.0 0.31 007760
569546 1-7/16 56 60 100 1140 10 12.0 0.31 007760
569548 1-1/2 58 60 100 1180 10 13.0 0.31 007760
569550 1-9/16 60 60 100 1200 10 13.0 0.31 007760
569552 1-5/8 62 60 100 1230 10 13.0 0.31 007760
569554 1-11/16 64 60 100 1250 10 13.0 0.31 007760
569556 1-3/4 66 60 105 1280 10 14.0 0.31 007760
569558 1-13/16 68 60 110 1400 10 15.0 0.31 008100
569560 1-7/8 70 60 110 1500 6 10.0 0.41 008100
569562 1-15/16 72 60 110 1600 6 10.0 0.41 008100
569564 2 74 60 110 1700 6 11.0 0.41 008100
569568 2-1/8 78 60 110 1800 6 12.0 0.41 008100
569570 2-3/16 80 60 120 2100 6 13.0 0.31 008330
569572 2-1/4 82 60 120 2200 6 14.0 0.31 009500
569576 2-3/8 86 60 120 2400 6 15.0 0.31 010800
569580 2-1/2 90 60 130 2600 6 16.0 0.31 012080
569584 2-5/8 94 60 130 3050 6 19.0 0.31 012700
569588 2-3/4 98 60 135 3400 6 21.0 0.31 013610
569596 3 106 60 150 4450 3 14.0 0.31 015670
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.

    • Conversion Calculator

    =
    1